STEEL-CRAFT | THERM-O-DOR
COLOURS
Steel-Craft’s Therm-O-Dor overhead doors are manufactured from top-quality, Canadian-made steel, and are designed from the inside out to ensure maximum strength. Our doors feature a patented mechanical interlock design and heavy-duty hardware. Together, these features offer industry-leading durability and excellent protection against break-ins.
All Therm-O-Dor overhead doors are corrosion-resistant and feature treatments of a zinc base coating and two polyester topcoats. The exteriors are paintable, won’t fade, and are easy to clean.
The TD 138 model comes with a 1-3/8" layer of polyurethane insulation, which gives an R-value of 12.60, twice the efficiency of competitors’ polystyrene panels.
The TD 134 model comes with a 1-3/4" layer of polyurethane insulation, which gives an R-value of 16.04, twice the efficiency of competitors’ polystyrene panels.
FEATURES
-
Flexible top seal keeps cold and debris out
-
Section weather seals keep wind and cold out
-
PVC retainer aids in door rigidity
-
Top-quality Canadian galvanized steel is durable and rust resistance
-
Two-coat exterior polyester paint finish on inner and outer skin is extremely durable
-
Therm-O-Break design reduces cold/heat/moisture conductivity
-
Mechanically interlocked front and back skins increase strength
-
TD 134 — CFC- and HCFC-free polyurethane core bonds to steel skins and nets an R-value of 16.04 in just 1-3/4" of thickness
-
TD 138 — CFC- and HCFC-free polyurethane core bonds to steel skins and nets an R-value of 12.60 in just 1-3/8" of thickness
-
Continuous steel overlap secures hardware attachments
-
Flexible floor seal conforms to minor irregularities to keep out cold and debris
-
Insulated windows feature sealed lites and high-impact polymer frames
-
Heavy-duty rollers and hardware are durable and make for easy installation
TD 138 OPTIONAL FEATURES
End Stiles
Single end
Hinges
14ga single end
11ga single end*
14ga intermediate
Track Rollers
2" 10 ball short stem
3" 10 ball short stem
2" 10 ball long stem*
3" 10 ball long stem*
Specialty Track Rollers Long Stem
2" nylon sealed bearing*
3" UHMW sealed bearing*
3" rubber sealed bearing*
3" nylon stainless shaft*
Top Fixture
Standard duty single
Bottom Corner Brackets
Standard duty
Locks
Sidelock
Interior barlock*
Exterior keyed barlock*
Handles
Tub handle*
PVC hand grip*
Handle step plate*
Vision Lites
23" x 7" *
24" x 12" *
34" x 16" *
Exhaust Ports
3" *
4" *
5" *
Strutting
DASMA PVCP Standard
Available to increase windload capacities*
Weatherstrip - bottom
3" U-type
4" U-type*
Weatherstrip - top
2" top flap
Weatherstrip - side
Steel/vinyl
PVC/vinyl*
Weatherstrip Retainer
Bottom PVC V
TOP PVC V
Guide Types
Standard lift
High lift*
Vertical lift*
Low lift double track*
(all available to allow following the roof slope if needed). Horizontal reinforcing engineered for specific size requirements.
Guide Mounting
Bracket mount
Angle mount continuous 13ga*
Angle mount reverse 13ga*
Torsion Springs
Standard 10,000 cycle
Optional increased cycle*
Torsion Shafts
(engineered for specific requirements)
14ga galvanized tube 1"
Cold roll solid shaft 1"
Torsion Shaft Bearings
Standard flange bearing 1"
2 bolt cast flange bearing 1" *
Torsion Bearing Plates
(engineered for specific weight requirements)
Therm-O-Dor TD-138 offers a selection of customized options that will enable you to meet virtually any application requirement. For additional information on how Steel-Craft can meet your needs in commercial overhead doors, please contact Garage One
Door Face
Optional upgrades to components that are connected to the door face.
-
Graduated End Hinge - available in increased gauge.
-
Track Rollers - available in a variety of formats to meet your specifications.
-
Low Lift Hardware
-
Locks - 2 point interior, 2 point exterior.
-
Lift Handle - 3 options available.
-
Vision Lite Windows - sealed glass: 23"x7"; 24"x12"; 34"x16"; consult your dealer on the wide variety of glass options.
-
Exhaust Ports - available in various sizes.
-
Strutting - to increase wind load capacity.
-
Specialty High Moisture Area Conversions
Guide
Optional upgrades to components that are related to the door guide. All lifts are available in 2" or 3" track.
-
High Lift - track and hardware that causes the door to rise vertically some distance above the top of the door opening before it levels out into a horizontal position. Available to meet a variety of height specifications.
-
Vertical Lift - track and hardware that causes the door to open vertically where no horizontal tracks are required. Available to meet all height specifications.
-
Low Lift Double Track - low headroom accessories which enable a door system to operate in minimal headroom conditions. Available to meet a variety of low headroom specifications.
-
Full Angle Mount - available in Continuous and Reverse (1" overlap).
Lift
Optional upgrades to components that are related to the door lift.
-
Torsion Spring Assembly - extensive cycle options are available to meet all specifications.
-
Torsion Shaft - available in 1" solid where 1" tube is specified.
-
End Bracket - 2-bolt flange bearing, available in 1".
TD 134 OPTIONAL FEATURES
Therm-O-Dor TD-134 offers a selection of customized options that will enable you to meet virtually any application requirement. For additional information on how Steel-Craft can meet your needs in commercial overhead doors, please contact Garage One
Door Face
Optional upgrades to components that are connected to the door face.
-
Graduated End Hinge - available in increased gauge.
-
Graduated Double End Hinge - available in increased gauge.
-
Track Rollers - available in a variety of formats to meet your specifications.
-
Top Fixtures - available in increased gauge.
-
Low Lift Hardware
-
Bottom Corner Bracket - available in increased gauge.
-
Failsafe Bottom Corner Bracket
-
Locks - 2 point interior, 2 point exterior.
-
Lift Handle - 3 options available.
-
Vision Lite Windows - sealed glass: 23"x7"; 24"x12"; 34"x16"; consult your dealer on the wide variety of glass options.
-
Aluminum - available in full view section; consult your dealer about insert options (glass, polycarbonate - double or triple wall).
-
Pass Door
-
Exhaust Ports - available in various sizes.
-
Strutting - to increase wind load capacity.
-
Aluminum L Retainer
-
Specialty High Moisture Area Conversions
-
Increased Gauge Section Face
Guide
Optional upgrades to components that are related to the door guide. All lifts are available in 2" or 3" track.
-
High Lift - track and hardware that causes the door to rise vertically some distance above the top of the door opening before it levels out into a horizontal position. Available to meet a variety of height specifications.
-
Vertical Lift - track and hardware that causes the door to open vertically where no horizontal tracks are required. Available to meet all height specifications.
-
Low Lift Double Track - low headroom accessories which enable a door system to operate in minimal headroom conditions. Available to meet a variety of low headroom specifications.
-
Moveable Center Posts
-
Full Angle Mount - available in Continuous and Reverse (1" overlap).
Lift
Optional upgrades to components that are related to the door lift.
-
Torsion Spring Assembly - extensive cycle options are available to meet all specifications.
-
Torsion Shaft - available in 1" solid where 1" tube is specified.
-
1-1/4" Solid Shaft
-
End Bracket - 2-bolt flange bearing, available in 1" and 1-1/4".
End Stiles
Single end
Double end 17'w+
Hinges
14ga single end
11ga single end*
14ga double end 17'w+
11ga double end 1000lbs
14ga intermediate
Track Rollers
2" 10 ball short stem
3" 10 ball short stem
2" 10 ball long stem
3" 10 ball long stem
Specialty Track Rollers Long Stem
2" nylon sealed bearing*
3" UHMW sealed bearing*
3" rubber sealed bearing*
3" nylong stainless shaft*
Top Fixture
Standard duty single
Standard duty double 17'w+
Heavy duty double 1300lbs*
Bottom Corner Brackets
Standard duty
Heavy duty 1300lbs
Heavy duty fail safe*
Locks
Sidelock
Interior barlock*
Exterior keyed barlock*
SECTION FACE 20ga*
Handles
Tub handle*
PVC hand grip*
Handle step plate*
Vision Lites
23" x 7" *
24" x 12" *
34" x 16" *
Fullview aluminum*
Pass Door Exhaust Ports
3" *
4" *
5" *
Strutting
DASMA PVCP Standard
Available to increase windload capacities*
Weatherstrip - bottom
3" U-type
4" U-type*
Weatherstrip - top
2" top flap
3" top flap - 17'w+
Weatherstrip - side
Steel/vinyl
PVC/vinyl*
Weatherstrip Retainer
Bottom PVC V
Bottom Aluminum L*
TOP PVC V
Guide Types
Standard lift
High lift*
Vertical lift*
Low lift double track*
(all available to allow following the roof slope if needed). Horizontal reinforcing engineered for specific size requirements.
Guide Mounting
Bracket mount
Angle mount continuous 13ga*
Angle mount reverse 13ga*
Torsion Springs
Standard 10,000 cycle
Optional increased cycle*
Torsion Shafts
(engineered for specific requirements)
14ga galvanized tube 1"
Cold roll solid shaft 1"
Cold roll solid shaft 1-1/4" *
Torsion Shaft Bearings
Standard flange bearing 1"
Heavy duty flange bearing 1" *
2 bolt cast flange bearing 1" *
Center plate flange bearing 1-1/4" *
End plate flange bearing 1-1/4"
2 bolt cast flange bearing 1-1/4" *
Torsion Bearing Plates
(engineered for specific weight requirements)