Garage Door Parts & Accessories

Part #1 – Safety Photo Eyes

For garage door openers manufactured after 1/1/93. All makes including Liftmaster, Genie, Craftsman, Chamberlain and others.

​

Part #2 – Track Brackets

L-shaped brackets that secure garage door track to the wall. Comes in various sizes #1 – #10.

​

Part #3 – Track, Vertical

Garage door track comes in 2″ and 3″ sizes. Full sets or cut to length.

​

Part #4 – Flag Bracket

For residential and commercial garage doors. Supports vertical and horizontal tracks and fastens to wall. Size depends on door type and height.

 

Part #5 – Cable Drums

Supports garage door lifting cables. Available in many different models including APCO, OMI, DNS, and others. Depends on door size.

​

Part #6 – Track, Horizontal

Garage door track comes in 2″ and 3″ sizes. Full sets based on door height or cut to length.

​

Part #7 – Angle Iron Brackets

Supports horizontal track from ceiling. Pre-punched 1.25″ X 1.25″ angle in 14GA or solid angle 1.5″ X 1.5″ X 1/8″. Priced per foot, 8 ft minimum.

​

Part #8 – Shaft

Tubular or solid shaft for torsion spring counterbalance assembly. Based on garage door width.

​

Part #9 – Torsion Spring

Safest garage door spring system. Size based on door size, weight, and cable drum type. Sold as installed only.

​

Part #10 – Quick Disconnect Door Arm

Attaches garage door to automatic opener and allows quick disconnect in the event of a power failure so door can be manually operated. Must have manufacturer’s name and model number to order.

​

Part #11 – Top Fixtures

Holds top roller for garage door and adjusts top section for tight fit. Size and type depend on door size and manufacturer.

​

Part #12 – Hinges, Graduated

Garage door hinges carry rollers and hinge door sections together. Hinges are numbered #1 – #10 and come in residential and commercial grades.

​

Part #13 – Bottom Fixtures

Also known as bottom corner brackets, carry the bottom garage door roller and also provide the connection for the lifting cables. Size and type depend on door lift (standard lift or low headroom track), size of door and manufacturer.

​

Part #14 – Weatherstripping

Bottom weatherstrip provides a seal between the garage door and the floor. Available for wooden and steel garage doors. Size and type depend on manufacturer.

​

Part #15 – Hinges, Center

Holds the garage door sections together and comes in residential and commercial grades.

​

Part #16 – Winding Cones

Plugs into the garage door torsion spring and provides a way to add tension to the spring. Size and type depend on spring size and are provided in pairs of stationary and winding cones.

​

Part #17 – Extension Springs

Available in numerous sizes and are color-coded based on garage door weight. Sold as installed only.

​

Part #18 – Garage Door Opener Parts/Access

Replacement parts for most brands include worm gear assembly, drive belts, circuit boards, starting capacitors and light socket kits and others. Must have manufacturer name and model number to order.

​

Part #19 – Rail Components

Garage door opener rail assembly parts include T-rail, chain or belt, travelers assembly, front idler bracket. Must have manufacturer name and model number to order.

​

Part #20 – Rollers

Garage door rollers are available in 2″ and 3″ sizes and come in nylon, steel, and plastic, with and without ball bearings and are essential to the garage door’s proper operation.

​

Part #21 – Locks/Handles

Locks for garage doors are available in an auto-latch style and a double lock bar set up. Size depends on door width. Lifting handles and step plates are also available in steel or plastic.

​

Part #22 – Pulleys/Sheaves

Pulleys are used with garage doors that normally have extension springs and are available in 3″, 4″, and 5″ diameters.

​

Part #23 – Cable

Garage doors are lifted by heavy aircraft cable in sizes 1/8, 5/32 and 3/16 in a 7X19 strand count. Sold as complete sets, depending on garage door size or cut to length as required.

​

Part #24 – Bearing Plates

Bearing plates are used to secure the counterbalance spring assembly to the door track and to the wall. For residential garage doors, there are usually three provided. All bearing plates come with a 1″ bearing that has 10 ball bearings.

​

If you require further assistance, or cannot find the part you are looking for, please contact us.

​

Garage one provides a complete set of products to install a complete garage door from recognized brand names in the market; such as, Amarr, Clopay, Wayne Dalton, Craftsman, Garaga, Stanley, Sears, Liftmaster, and Genie.

​

​

*Please do not try to service your own garage door unless you are a trained professional. At Garage One we service and repair residential and commercial garage doors & openers of all makes and models. Call us today for prompt and efficient service! 

​

The GTA and Southern Ontario's Trusted Source for Residential & Commercial Garage Door Installation, Replacement, & Repair.

​

Garage One, has over 15 years of expertise providing overhead garage door services such as new installations, repairs, garage door opener installation and repair, and general garage door maintenance throughout the Greater Toronto Area & Southern Ontario, including:

Ajax, Aurora, Bolton, Brampton, Burlington, Etobicoke, Hamilton, London, Markham, Mississauga, Newmarket, North York, Maple, Oakville, Oshawa, Pickering, Scarborough, Thornhill, Richmond Hill, Toronto, Vaughan, Whitby & Woodbridge, and many more!

​

​