COUNTER DOORS / SHUTTERS
Clopay counter shutters (doors) are ideal for concession areas, cafeterias, pharmacies, cashiers, parts and tool storage areas where resistance to flame spread or smoke penetration is not required.
FEATURES & BENEFITS
CESC10 STANDARD COUNTER DOOR/SHUTTER
Sizes:
Wind Load:
Seismic Performance Validation:
Materials & Finishes:
Mounting:
Operation:
21' wide, 10' high standard construction.
Doors can be designed to meet specific PSF wind Load requirements.
Specific seismic calculations can be provided for all doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.
Curtains are availalbe in #18 B&S gauge or extruded .055" aluminum with clear or color anodized finish, 22 gauge galvanized steel in light gray or 22 gauge stainless steel with #4 finish. Powder Coating optional.
Face of wall or between jambs in both interior and exterior walls. Approved wall types for the mounting of fire doors include masonry or structural steel jambs.
Standard motor, hand crank or push-up designs are available based on size and weight. Lifting the counter door requires no more than 25lbs of force. Concealed tubular motors provide a solution for strict dimensional limitations around the header or aesthetic requirements that lend themsleves to its smaller, compact design.
CESC20 STANDARD COUNTER DOOR WITH INTEGRAL FRAME
Sizes:
Wind Load:
Seismic Performance Validation:
Materials & Finishes:
Mounting:
Operation:
11'7"' wide, 4' 10"' high in walls 4" to 13" thick.
Doors can be designed to meet specifc PSF wind Load requirements.
Specific seismic calculations can be provided for all doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.
Integral welded head and jambs are formed of 16 gauge 300 series #4 finish stainless steel shapes or 16 guage primed steel shapes. Curtain material: aluminum slats are clear or color anodized; galvanized steel in light gray; stainless steel is 300 series in #4 finish. Powder Coating optional on non-stainless components.
Face of wall or between jambs in both interior and exterior walls. Approved wall types for the mounting of fire doors include masonry or structural steel jambs.
Push-up or hand crank.
FIRE RATED COUNTER DOOR
CERC10 COUNTER FIRE DOORS
Counter Fire Door Listings:
Sizes:
Smoke Control Counter Fire Doors:
Counter Fire Door Mounting:
Operation:
UL Classified 1 1/2 Hour Countertops:
UL 3 HR, 1 1/2 HR, 1 HR and 3/4 HR Classified labels. Counter Fire Doors are listed with the Office of the California State Fire Marshal.
Fits openings up to 16' wide when height is 7'6" or less, or openings up to 12' wide when height is 10' or less.
Add optional UL Classified smoke and draft control to counter fire doors. Containing smoke saves lives and building property and also aids in fire containment by slowing oxygen flow to the fire source. This added protection is easy to add to your building and may be required by your local building code. More Smoke Control information here.
Approved wall types for mounting include rated drywall, masonry, or steel walls.
motor, chain or crank operating systems are recommended for ease of testing and controlled automatic closing speed. Click on the Operator Information button at right for a full description of these systems. Push up is available for counter fire doors up to 80 sq. ft. where usage and testing is infrequent.
when used in conjunction with fire rated counter doors, countertops must also be fire rated. Clopay offers UL classified countertops in two materials:
- Plastic laminate countertops - available in a range of standard laminates in a single piece up to 10' wide, and in two pieces with center joint to 16' wide.
- 14 gauge, #4 finish stainless steel countertops are custom designed to a maximum wall opening width of 11'2" for face of wall units, 11'10" for between jambs, for a maximum 12" wall thickness.